The Single Portable SAE Legacy Heat-troller We stopped making these except for Aerostich. the DC Coax connector that we developed is so much better for plugging and unplugging and is more efficient. We sold all of our SAE Battery Harnesses to Aerostich and removed it from our website. Now after customers telling us that Aerostich does not have any and even before the virus, I could not get them to place an order. Because of this we have put it back on our website for those that really have to have it. The circuit board is the same latest Portable Heat-troller  Version 12. All the Chinese controllers are copies of our version 6, about 18 years old and with a part left out off. Which is why they often fail. And when they do they are dead. Like our Remote Heat-troller, the Legacy Heat-trollers are protected from shorts, overloads, reverse polarity, and water. They use the SAE designed connector we developed with 16awg wire and a SPT-1 automotive grade overmold that is designed for -40 degree F temperature. The SAE Battery Harness comes with a 15amp fuse.

Recommended for All Heated Clothing

YES OF COURSE - ALL HEAT-TROLLERS ARE WATERPROOF!

If you want to use the Battery Tender cable that comes on many bikes that has a SAE connector on it, then you need to swap the fuse in the Tender cable with a 15Amp one you can buy at an automotive supply store.

The Single Portable Legacy Heat-troller

Electronic, solid state design coupled with analog control for a full range of heat, with minimum power loss
LED provides visual feedback for On, Off, Power Level & Polarity
Sealed Switch with tactile On/Off with 300° rotation, providing heat from 3% to full on!
Solid State, High Tech, Safe & Reliable Electronics designed by us
Fits comfortably into the palm of the hand or pocket or on the Bike or Scooter or Horse or just about anywhere!
Handles 15 amps at 13 volts with internal reset for overloads & shorts & works from 7 volt to 24 volt.

WARRANTY

We build for longevity and durability. We have previous versions of our Heat-trollers still fully functional and in use after 20 years. If it fails due to faulty parts or manufacturing within 3 YEARS of your purchase we WILL replace or fix it.

All warranties will be voided IF the following guidelines are not followed:

* Do not cut off the plugs, Ring connectors or CUT ANYTHING!
* Only use the battery harness supplied with the controller, cigarette plug adaptor, or BMW power port adaptor provided to power your Heat-troller! Attempting to use a home-made BMW or cigarette plug adaptor or Fuse Blocks will void the warranty.
* The Heat-troller should be installed in accordance with the enclosed instructions. We are not responsible for units damaged by incorrect installation, improper use or shorts in the clothing made by others.