The Single Handgrip/Seat Legacy Heat-troller was designed for controlling heated hand grips and/or a double heated seat. Comes with a Relay and Fuse. Two Switches and LEDs are on 5ft cords for panel mounting. The 5ft data cables go to the Heat-troller box which, using the included Velcro, mounts under the fairing giving a clean look installation. On the other side are two pairs of color hook up wire for going to the devices and another pair to the power source.

This is the Version 12. All the Chinese controllers are copies of our version 6, about 18 years old and with a part left out off. Which is why they often fail. And when they do they are dead. Like our Remote Heat-troller, the Legacy Heat-trollers are protected from shorts, overloads, reverse polarity, and water.

If installing with Rincon Grips for snow mobile, as us to email you the detail instructions

YES OF COURSE - ALL HEAT-TROLLERS ARE WATERPROOF!

The Single Handgrip/Seat Legacy Heat-troller

Electronic, solid state design coupled with analog control for a full range of heat, with minimum power loss
LED provides visual feedback for On, Off, Power Level & Polarity
Sealed Switches with tactile On/Off with 300° rotation, providing heat from 3% to full on!
Solid State, High Tech, Safe & Reliable Electronics designed by us
Handles 15 amps at 13 volts with internal reset for overloads & shorts & works from 7 volt to 24 volt.

WARRANTY

We build for longevity and durability. We have previous versions of our Heat-trollers still fully functional and in use after 20 years. If it fails due to faulty parts or manufacturing within 3 YEARS of your purchase we WILL replace or fix it.

All warranties will be voided IF the following guidelines are not followed:

The Heat-troller should be installed in accordance with the enclosed instructions. We are not responsible for units damaged by incorrect installation, improper use or shorts in the clothing made by others.