Warm & Safe Heated Gear
5 Level Heat-troller & Single Remote ReplacementSKU 11178110
- Regular price $59.95
The 5 Level Heat-troller can be used with Optional Remote Control is designed to be a low cost solution for those that at first only want to control Heated Gloves, Glove Liners and Socks or even our 65 Watt WaterProof Jacket Liner. A 5 level controller or as our competitors make, a 3 level one, will not work well with a 90 Watt jacket liner because the heat levels between the steps would not allow for proper heat control. That is why we designed this heat-troller with the ability to sync to our latest version of our single remote control. The remote has the 3 blink response to tell you it is working and uses 2 AAA batteries for longer life.
Options: Battery Tender Adapter Set - This is a 2 adapter set of cables to convert the Battery Tender battery harness and Battery Tender device to Coax connection making it easier to use and to make it easier to plug our heated gear into. Everyone knows that for the old style SAE connector to make a good connection it needs to fit tight. Those who have had the experience knows what a pain it is to unplug the connection. By putting these cables on and leaving them you now have a more efficient connection and yet one that unplugs without damaging your hand or the bike.
Warning: If you are going to do this then swap the fuse in the Tender cable with the one you received with the Heat-troller battery harness, so it will handle the draw. You need at least 15A fuse in the battery harness.
The 5 Level Heat-troller with Optional Remote Control
Electronic, solid state design coupled with analog control for a full range of heat, with minimum power loss
LED provides visual feedback for On, Off, Power Level & Polarity
Sealed Switch with tactile On/Off with 300° rotation, providing heat from 3% to full on!
Heat-troller is waterproof and can be left on the bike in the rain
Solid State, High Tech, Safe & Reliable Electronics designed by us
Fits comfortably into the palm of the hand or pocket or on the Bike or Scooter or Horse or just about anywhere!
Battery harness made of automotive grade wire that is resistant to oil, acid, water and grime with automotive style fuse
Handles 15 amps at 13 volts with internal reset for overloads & shorts & works from 7 volt to 24 volt.
We build for longevity and durability. We have previous versions of our Heat-trollers still fully functional and in use after 20 years. If it fails due to faulty parts or manufacturing within 3 YEARS of your purchase we WILL replace or fix it. All warranties will be voided IF the following guidelines are not followed: * Do not cut off the plugs, Ring connectors or CUT ANYTHING! * Only use the battery harness supplied with the controller, cigarette plug adaptor, or BMW power port adaptor provided to power your Heat-troller! Attempting to use a home-made BMW or cigarette plug adaptor or Fuse Blocks will void the warranty. * The Heat-troller should be installed in accordance with the enclosed instructions. We are not responsible for units damaged by incorrect installation, improper use or shorts in the clothing made by others.