Loading... Please wait...

Our Newsletter

Single Remote Heat-troller Powered

  • Image 1
Calculated at checkout

Product Description

A Whole New Platform Technology - Beyond Xtreme to Version X(i)-Remote!
This Remote Powers from a Switched Power Point or the Battery on the Bike since it requires very little power. It is for those that do not trust the coin style battery that is in the Single Remote.
Replaces the Old Semi-Mount Remote Heat-troller and gives you a lot more for less work!

Yes it comes with two Battery Harnesses. You can cut one up to wire to the switched power source for the Remote Control.
Size Receiver 2.5 x 1.75 x .5 inch, Remote Control 1.9 x 1.3 x .75 inch

Battery Tender Adapter Set - This is a 2 adapter set of cables to convert the Battery Tender battery harness and Battery Tender device to Coax connection making it easier to use and to make it easier to plug our heated gear into. Everyone knows that for the old style SAE connector to make a good connection it needs to fit tight. Those who have had the experiance knows what a pain it is to unplug the connection. By putting these cables on and leaving them you now have a more efficient connection and yet one that unplugs without damaging your hand or the bike.

Warning: If you are going to do this then swap the fuse in the Tender cable with the one you received with the Heat-troller battery harness, so it will handle the draw. You need at least 15A fuse in the battery harness.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!