This is the latest Single Remote Heat-troller Version CMB. the Receiver is narrower, the Remote has the 3 blink response to tell you it is working and uses 2 AAA batteries for longer life
Yes it comes with a 32in Battery Harness
Battery Tender Adapter Set - This is a 2 adapter set of cables to convert the Battery Tender battery harness and Battery Tender device to Coax connection making it easier to use and to make it easier to plug our heated gear into. Everyone knows that for the old style SAE connector to make a good connection it needs to fit tight. Those who have had the experiance knows what a pain it is to unplug the connection. By putting these cables on and leaving them you now have a more efficient connection and yet one that unplugs without damaging your hand or the bike.
Warning: If you are going to do this then swap the fuse in the Tender cable with the one you received with the Heat-troller battery harness, so it will handle the draw. You need at least 15A fuse in the battery harness.
Features: Electronic, solid state design coupled with analog control for a full range of heat, with minimum power loss
LED provides visual feedback for On, Off, Power Level & Polarity
Sealed Switch with tactile On/Off with 300° rotation, providing heat from 3% to full on!
Heat-troller is waterproof and can be left on the bike in the rain
Solid State, High Tech, Safe & Reliable Electronics designed by us
Fits comfortably into the palm of the hand or pocket or on the Bike or Scooter or Horse or just about anywhere!
Battery harness made of automotive grade wire that is resistant to oil, acid, water and grime with automotive style fuse
Handles 15 amps at 13 volts with internal reset for overloads & shorts & works from 7 volt to 24 volt.
Size Receiver 2.5 x 1.15 x .5 inch, Control 2 x 1.5 x .75 inch
Showing reviews 1-5 of 12 | Next
Posted by Frank H. on 24th Jan 2017
I love the wireless controller. Didn't think I would need it but it came highly recommended and I second that. These guys know what they are talking about.
Posted by Russ on 23rd Jan 2017
Provides the right amount of heat for every situation. I wish it came with a lanyard or some way to mount the controller while driving. As such, it's been in a glove box for a few months (here in CO winter) until it gets warm enough to mount on the brake reservoir. It was also a bit of a tight fit to get all the wires under my batter cover in a Honda Silverwing.
Posted by Todd on 13th Jan 2017
I love having a wireless controller. It is mounted on my handlebar right next to the brake reservoir. I can easily adjust the heat on the fly wearing heavy winter gloves. Perfect!
Posted by B. Smith on 18th Apr 2016
Needed a way to control after market heated seats, which were only on/off. Got two wireless remotes, heat-trollers, and cable pigtails to attach to seat heaters. So far they work great. I have mostly used without remote, just powered they come on at 1/3 power, but I have tested full range with remote. I got remote pouch with 180 clip, clips to handle bar cable nicely. Passenger remote, either fasten to saddlebag or put in pocket. Remotes have lanyard for extra security from detachment.
Posted by John P. on 23rd Dec 2015
AaI wanted a way of controlling my heated gear without all the wires. This mounts very easily on my gps with Velcro and doesn't take long to heart my heated pant liner. I have used this product down to 38% so far and it does a great job of keeping the temperature consistent.
I live in Washington state and the fact that it is waterproof is an added bonus.
Showing reviews 1-5 of 12 | Next