NOTES: The drawing shows one way to hook up the grips. There seems to be a disagreement
as to which wires are best to get the most heat. To see the other way to wire the grips up,
go to the website mentioned above. Different people have told me different information on which
wire, the White or Blue, is the high current.
Wire the two red wires coming off of the Dual Star grips together
and wire the two white wires coming off of the Dual Star grips together
so that you end up with two wires: 1) Red with Red. 2) White with White.
Then the White goes to White on the Heat-troller and the Reds go to the
Purple on the Heat-troller.
You will not wire up the two Blue wires to anything. The heat troller provides
the ground circuit. Tape the Blue wires off individually so they ARE NOT connected
together and do not short out.
If you are going to use a relay, on a 5 pin relay, ingore pin 87A
Your Shopping Cart Click here to view what you have already added to your cart, and to check out.
NOTE: if you had originally logged in and now the top of the screen says "Welcome, Guest" then your log in session has expired.
