Q. Whose liner has the higher collar area that covers the most neck? I
understand they are both heated within the collar which I really like.
A. you can have the collar go over your chin and under the helmet. So it is
tall. And yes it is heated.
Q. What is your opinion of the quality of the zipper or fastener on each for
ease of use and thermal properties?
A. All zippers are the best YKK brand. the main zipper has a baffle between
you and the zipper up to the neck. Zippered hand pockets and integrated plugs
for connecting gloves and pants are also hidden in small zippered pockets when
not in use. Eureka! No more dangly cords when sipping coffee at the cafe. WE are
the first to do this. I have already seen others copy it.
Q. The Warm & Safe advertisement says it's liner is pretty thin. Which one do
you think is warmer (thicker) when you are not using the electric heating?
A. The Warm & Safe Heated Liner Are designed to be temperature neutral. As
you ride through warm and cold zones you won't have to stop by the side of the
road to dress and undress. When not turned on, our liner is not going to get as
warm as others and it is designed that way.
Q. The W&S advertises elastic bands that hold the liner tight to your skin.
Does any one else do this?
A. Lycra stretch panels allow a form fitting close fit to the body without
sacrificing comfort, and allow optimum heat transfer to the body. WE started
this over 10 years ago and any one using it has copied it from us. This includes
Klan that was Giali who I showed the design to in Italy when they claimed they
wanted to do business with us.
Q. Also are either of them more waterproof (resistant) than the other?
A. The Warm & Safe Heated Liner is designed to breathe. It is not waterproof
or resistant by design but getting it wet just makes the heat transfer even
better.
Q. Is the glove circuit independent of the jacket, ie. having a separate
input for the controller, or is it like others where it is feeding off the
jacket current. I would like to use the dual control heat-troller to control the
glove heat separately from the jacket, and would like to eliminate the need to
fish my Y-cable through my jacket sleeves to accomplish this.
A. Because of an ingenious design, we have made each The Warm & Safe Heated
Liner capable of running with either a single or dual heat-troller. This means
you can run the gloves off the liner or with the same wires built into the liner
you can run the gloves independent. You can see the information in the instruction sheet.
Heated Liner Instructions PDF
Q. I have a Warm & Safe liner and a pair of Widder gloves how do I get them to work together?
A. This can be done but is a bit of a pain. Widder is the only company that designes their gloves to work in series.
If you plug them in to anyone else's heated gear then you will over drive them and make them too hot and could cause
a problem. All Warm & Safe Heated Liners have a zipper to get into the inside of the liner and to the wires going
to the gloves. I have put a link to the drawings to modify the wires so that you can run Widder gloves. You will
also need adapters from the Widder connectors on the gloves to the coax connector on the liner. You can buy them from
Widder or from us.
Widder Glove Harness Instructions PDF
Your Shopping Cart Click here to view what you have already added to your cart and to check out.
NOTE: If you had originally logged in and now the top of the screen says "Welcome, Guest" then your log in session has expired.
