This new Glove Liner is designed to be used with the 7.4volt battery or when used with the Multi-Voltage kit, will run on 12V systems. For Hunters, Hikers, Bicyclers, Gardeners and others wanting mobilty, these new Glove Liners and harness will work much better for your needs... It is designed to also plug into the Heat Layer base layer to work off one power system.
We made this product, like most of our 7.4V heated products to help people who need to stay warm when doing normal activities as well as sports. But we were really pushed because of people we know with MS, Lupes and Reynauds. This will open up activities to people that have trouble with the cold. Please pass the word.
Warm, Light and Thin. Fits Under Most Work Gloves or can be worn alone.
These Glove Liners are designed to work wth our 7.4 Volt batteries and if you are not using it with our Base Layer, you need a lanyard harness system to power them from our 7.4V portable battery pack.
Posted by Randy from New York on 7th Mar 2017
Recently purchased these after having owned a couple generations of Zanier products, which over time failed. My first and only use of these liners so far was a five day ski trip where the temps held around zero Fahrenheit each day. I set the controller to the 2nd of 4 levels and never experienced cold fingers. At the end of each day (6 -7 hours) the battery showed I still had 40% remaining. Very happy with the performance so far. The other brand never worked as nicely as these. True, the large battery pack and having to run wires through my jacket was certainly more to deal with and get used to, but the results far outweighed those factors.