A Whole New Platform Technology - Beyond Xtreme to Version X(i)-Remote!
This is the new Remote Controller Design with the 2 AAA Batteries and a bunch of new features such as visual response from the receiver
A Dual Heat-troller is not a two-fer. It is not for two people but to control multiple clothing on one person!
Battery Tender Adapter Set - This is a 2 adapter set of cables to convert the Battery Tender battery harness and Battery Tender device to Coax connection making it easier to use and to make it easierr to plug our heated gear into. Everyone knows that for the old style SAE connector to make a good connection it needs to fit tight. Those who have had the experiance knows what a pain it is to unplug the connection. By putting these cables on and leaving them you now have a more efficient connection and yet one that unplugs without damaging your hand or the bike.
Warning: If you are going to do this then swap the fuse in the Tender cable with the one you received with the Heat-troller battery harness, so it will handle the draw. You need at least 15A fuse in the battery harness.
Replaces the Old Semi-Mount Remote Heat-troller and gives you a lot more for less work!
Yes it comes with the Battery Harness
YES OF COURSE - ALL HEAT-TROLLERS ARE WATERPROOF!
Size Receiver 2.5 x 1.75 x .5 inch, Control 2.35 x 1.3 x .75 inch
Posted by Matt on 6th Jan 2014
This is a great controller. I love being able to have a little heat or alot of heat. Synched up without any problem on the first try. I would recommend this controller to anybody.
Posted by Bob on 4th Dec 2013
Don't be restricted as to the location of the controller for your heated gear put it where you want it. That was the main reason for choosing this controller but it is a great controller as well. So don't leave home without one.
Posted by Unknown on 29th Nov 2013
In addition to working great - which I would expect - this thing is so much more convenient than having the one more hard wire connection. I just clip it on my outer jacket and leave it there.
Posted by John Pitts on 24th Nov 2013
I recently ordered a new Jacket from WnS together with the Dual Remote.
WnS synced the controller prior to shipment so all I needed to do was connect and ride.
Works a treat!
I have a single controller from a competitor that I dont like at all. Had trouble syncing and the competitors unit does not have an on-off detent so you are never sure if the controller is off or not.
Highly recommend the WnS Dual controller.
Lots of range to get the heat just where you want it. And being able to adjust the gloves sperately from the jacket is ideal. I find the controller must be set a bit higher for the gloves than the jacket to be comfortable.
Posted by Perry B on 15th Nov 2013
I called Mike lat in the day on a Wed afternoon. To ordered a dual remote heat troller. I got in time for a Ride Saturday morning(from his factory to Wis no less!!! Fast forward a month and a half...I thought the rececver was overheating as something on the insides of a jacket liner made by company G was getting really hot during operation...In short it WAS NOT the heat troller...It was a splitter made by G themselves.
After removing defective product,went for a 70 mile ride.On a GS at 40 degress at high speed no less!!! It worked fantastic!!!!! I couldnt be more pleaseed with it.