A Whole New Platform Technology - Beyond Xtreme to Version X(i)-Remote!
This is the new Remote Controller Design with the 2 AAA Batteries and a bunch of new features such as visual response from the receiver
A dual heat-troller is not a two-fer. It is not for two people but to control multiple clothing on one person!
Replaces the Old Semi-Mount Remote Heat-troller and gives you a lot more for less work!
Yes it comes with the Battery Harness
YES OF COURSE - ALL HEAT-TROLLERS ARE WATERPROOF!
Size Receiver 2.5 x 1.75 x .5 inch, Control 2.35 x 1.3 x .75 inch
Want a Belt Pouch for the Dual Remote Heat-troller?
Posted by Bob on 4th Dec 2013
Don't be restricted as to the location of the controller for your heated gear put it where you want it. That was the main reason for choosing this controller but it is a great controller as well. So don't leave home without one.
Posted by Unknown on 29th Nov 2013
In addition to working great - which I would expect - this thing is so much more convenient than having the one more hard wire connection. I just clip it on my outer jacket and leave it there.
Posted by John Pitts on 24th Nov 2013
I recently ordered a new Jacket from WnS together with the Dual Remote.
WnS synced the controller prior to shipment so all I needed to do was connect and ride.
Works a treat!
I have a single controller from a competitor that I dont like at all. Had trouble syncing and the competitors unit does not have an on-off detent so you are never sure if the controller is off or not.
Highly recommend the WnS Dual controller.
Lots of range to get the heat just where you want it. And being able to adjust the gloves sperately from the jacket is ideal. I find the controller must be set a bit higher for the gloves than the jacket to be comfortable.
Posted by Perry B on 15th Nov 2013
I called Mike lat in the day on a Wed afternoon. To ordered a dual remote heat troller. I got in time for a Ride Saturday morning(from his factory to Wis no less!!! Fast forward a month and a half...I thought the rececver was overheating as something on the insides of a jacket liner made by company G was getting really hot during operation...In short it WAS NOT the heat troller...It was a splitter made by G themselves.
After removing defective product,went for a 70 mile ride.On a GS at 40 degress at high speed no less!!! It worked fantastic!!!!! I couldnt be more pleaseed with it.
Posted by Dave on 3rd Nov 2013
I don't have a lot of time or miles on the two Dual Remote Control Heat-trollers I bought for my wife and I but they have been great. Ours came pre-synced so we just swapped wires on the jackets from the wired remotes we were using and we were good to go. I used the Heat-troller Pouch with 180 clip for each and these make attaching to the bike where you can both see and use them... easy. Mine is on the mirror stalk with a zip tie and my wife's is on some cables that go down in front of the steering stem.