Warm & Safe Heated Gear
Dual Portable Legacy Heat-troller
SKU 11348210-
Sale
- Regular price $99.95
The Dual Portable Legacy Heat-troller
Dual Portable Heat-troller Comes with a 32inch Battery Harness with covered fuse holder. This is now the Version 12. All the Chinese controllers are copies of our version 6, about 18 years old and with a part left out off. Which is why they often fail. And when they do they are dead. Like our Remote Heat-troller, the Legacy Heat-trollers are protected from shorts, overloads, reverse polarity, and water. They use the coax designed connector we developed with 16awg wire and a SPT-1 automotive grade overmold that is designed for -40 degree F temperature.
Recommended for All Heated Clothing
YES OF COURSE - ALL HEAT-TROLLERS ARE WATERPROOF!
A dual heat-troller is not a two-fer. It is not for two people but to control multiple clothing on one person!
For those that don't want to either have two battery harnesses on the bike or don't want to take off the Battery Tender harness that many shops are putting on the bikes, there is the Battery Tender Adapter Set. This is a 2 adapter set of cables to convert the Battery Tender battery harness and Battery Tender device to Coax connection making it easier to use and to make it easier to plug our heated gear in to it. Everyone knows that for the old style SAE connector to make a good connection it needs to fit tight. Those who have had the experience knows what a pain it is to unplug the connection. By putting these cables on and leaving them you now have a more efficient connection and yet one that unplugs via the coax connectors without damaging your hand or the bike.
Warning: If you are going to do this then swap the fuse in the Tender cable with the one you received with the Heat-troller battery harness, so it will handle the draw. You need at least 15A fuse in the battery harness.
The Dual Portable Legacy Heat-troller
Electronic, solid state design coupled with analog control for a full range of heat, with minimum power loss
LED provides visual feedback for On, Off, Power Level & Polarity
Sealed Switch with tactile On/Off with 300° rotation, providing heat from 3% to full on!
Solid State, High Tech, Safe & Reliable Electronics designed by us
Fits comfortably into the palm of the hand or pocket or on the Bike or Scooter or Horse or just about anywhere!
Battery harness made of automotive grade wire that is resistant to oil, acid, water and grime with automotive style fuse
Handles 15 amps at 13 volts with internal reset for overloads & shorts & works from 7 volt to 24 volt.
Dimensions: 2.0” x 3.0” x 1.0”
WARRANTY
We build for longevity and durability. We have previous versions of our Heat-trollers still fully functional and in use after 20 years. If it fails due to faulty parts or manufacturing within 3 YEARS of your purchase we WILL replace or fix it.
All warranties will be voided IF the following guidelines are not followed:
* Do not cut off the plugs, Ring connectors or CUT ANYTHING!
* Only use the battery harness supplied with the controller, cigarette plug adaptor, or BMW power port adaptor provided to power your Heat-troller! Attempting to use a home-made BMW or cigarette plug adaptor or Fuse Blocks will void the warranty.
* The Heat-troller should be installed in accordance with the enclosed instructions. We are not responsible for units damaged by incorrect installation, improper use or shorts in the clothing made by others.